Welcome to Headland Technology Client log in

TRUMPF logo icon
Product Focus

TRUMPF’s new part separator simplifies removal of small parts from sheet metal


TRUMPF’s latest innovation, the TruTool PS 100 part separator tool, is a game-changer for companies with highly productive 2D laser cutting machines. This tool simplifies the removal of small parts from scrap skeletons of processed sheets, saving time and reducing the risk of operator injury. Previously, operators had to rely on hammers or similar tools to release components, which was not only tedious but also posed a risk of damaging the parts. With the TruTool PS 100, companies can now improve their productivity and safety standards. Don’t miss out on this opportunity to streamline your operations and enhance your bottom line. 

The easiest way to release parts: Ten times faster than manual  

Introducing the TruTool PS 100 – the answer to faster and safer part separation. With its innovative pneumatic power, this tool can release parts up to ten times faster than manual handling. Say goodbye to the risks and hazards of traditional methods, and hello to a more efficient and reliable solution. The TruTool PS 100 is capable of separating parts with nano joint and micro joint connections in material thicknesses of up to 12mm, regardless of the type of steel being processed. Don’t let slow and dangerous part separation hold you back – upgrade to the TruTool PS 100 today. 

Unlocking the power of easy operations  

The TruTool PS 100 from TRUMPF is a power tool that takes ergonomics seriously. Designed to prevent operator fatigue, the handle dampens vibrations by 20 percent and allows for easy guidance in different positions. With the ability to operate it with one or both hands and with either hand, the TruTool PS 100 ensures sustained high efficiency and operator relief. To meet the needs of most users, TRUMPF provides two different types of air connections, allowing for easy adjustment of the force needed to remove parts from the nest. And with ISO standards and other international requirements met, you can trust the TruTool PS 100 to get the job done right. Upgrade your tool set today. 

Customised tool tips ensure part quality 

To prevent damage to parts as they are removed, the TruTool PS 100’s rubberised hammer tips can be customised to meet different requirements. A medium-hard hammer tip is used as standard. It is primarily suitable for mild steel and medium sheet thicknesses. The optional soft hammer tip ensures careful handling of aluminium and non-ferrous metal parts. A third option, the hard hammer tip, increases impact intensity and creates advantages in thicker sheet metal and high-strength materials. 

Have you heard about the new TruTool part separator?  

It’s a total game-changer! Separating parts has never been easier! If you want to learn more about it, you should contact our Headland tooling experts today. Trust me, you won’t regret it! Don’t miss out on this amazing opportunity to get your hands on one of these bad boys. Let’s make our lives easier and get the job done in no time! #TruTool #PartSeparator #ToolingExperts #GameChanger #GetItNow 


TRUMPF TruTool PS 100 part separator tool

pdf438 KB

Our Experts

Joe Tippel

Joe Tippel

Technical Sales Engineer - Fabrication Division

1300 138 285


Brett Buntman

Brett Buntman

Parts – Senior Sales Engineer

1300 138 258