Typically used for small parts which require higher accuracy
With certified accuracy from 6 microns, and ability to scan parts greater than 160mm diameter. The total setup and inspection time for new parts is approximately 4 seconds.
Automatic report generation and alignment with no requirement for fixtures. Results enable identification of ‘bad’ parts and are also traceable, ISO10360-4. Inspect multiple parts at once, reverse engineer at high speed and re-position and merge scan data.
With the 2D and 3D features, you’ll be able to capture the texture of the part and also the 3D shape, measure edges in 3D. You’ll have the ability to scan the part in less than 10 seconds.